Pay special attention to the sway bar link during installation. There should be a distance of 0.5cm-1cm between the sway bar link and the hood closed. After the sway bar link is installed, pay attention to check that the distance between the accessories around the sway bar link and the sway bar link is 0.5 cm-1cm, do not stick together, otherwise there will be noise when the car is driving, which will affect the driving.
The vehicle is installed with a sway bar link to eliminate the impact of the vibration caused by the uneven ground on the vehicle body. The vehicle body uses an independent suspension system to absorb a large amount of external vibration.
Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.
This stabilizer link / sway bar link features: 1 . Heat-treated, precision-machined ball ends provide consistent torque and smooth operation throughout the drive range 2. Designed to withstand the harshest driving conditions 3. Signs that your anti-roll bar linkage needs to be replaced include dull sounds when cornering and bumping, loose or misaligned steering wheels, poor handling, uneven tire wear, and visible damage in the suspension system
This stabilizer link / sway bar link surface treatment can be zinc-chrome, black, or other colors. And the circlip also can be different colors. The OEM number is BB5Z5K484A. Our factory has more than 700 kinds of sway bar links.
This stabilizer link / sway bar link is fitting for Daewoo/ Chevrolet/ Kia. If you also need other models, please kindly inform us. We have around more than 700 kinds of stabilizer links.
The stabilizer link / sway bar link Consists of a connecting rod and a ball head. The ball head is composed of a ball seat, a ball pin, a plastic nut, a O-shaped snap ring, a dust cover and a O-shaped tie ring. The ball seat is equipped with a ball pin; the ball pin is covered with a dust cover , The bottom of the dust cover is connected to the ball seat through a C-shaped beam ring, the ball seat is in the shape of a drop, a connecting hole is provided on one side of the ball seat, and an assembly hole corresponding to the ball pin is provided on the ball seat.
The car stabilizer link is designed to be installed on the top of the rear shock tower. The main role is to increase the strength of the trunk and reduce the deformation of the vehicle compartment due to centrifugal force transverse to reduce roll in the rear of the turning of the vehicle, to improve the turning performance of the vehicle.
Our company has specialized in manufacturing strut mount, control arm bushing, stabilizer link, etc. for more than 10 years, and has mature technology and craftsmanship. Our factory has about 800 kinds of strut mounts, with a very complete variety of top rubber mounts.
Our company has specialized in manufacturing strut mount, control arm bushing, stabilizer link, etc. for more than 10 years, and has mature technology and craftsmanship. Our factory has around 800 kinds of the strut mounts, has a very complete variety of top rubber mount.
Our company has specialized in manufacturing strut mount, control arm bushing, stabilizer link, etc. for more than 10 years, and has mature technology and craftsmanship. If you have any items of interest, please feel free to contact us.
Whatsapp : 
Tel : 
Email : 
