The shock absorber strut mount is composed of rubber and steel. Our factory has around 800 kinds of shock absorber strut mounts for a lot of series cars. And our strut mounts' quality warranty is 50,000km or 2 years.
497209W61A is fit for Nissan Teana power steering hose. And its quality warranty is 2 years. We also have other items for Nissan cars. Please kindly check our websit.
The power steering pressure and oil return hose are designed according to OE design and specifications to ensure accurate and durable installation. It was repeated, using the security features and the use of high-quality material can be prevented OE wiring premature failure.
Our factory has professional automatic bending, cutting, rubber molding, phosphating production lines, specializing in the production of power steering hose for more than 10 years. We focus on making high-quality power steering hose.
The power steering pressure hose is suitable for CITROEN C4 C5. The factory has professional production lines for automatic bending, cutting, rubber molding, and phosphating. So we can guarantee the quality of the power steering hose.
Our factory is mainly manufacturing strut mount, control arm bushing, stabilizer link, etc. for more than 10 years, and our factiry has mature technology and craftsmanship. If you have any interested stabilizer links, please feel free to contact us.
Drawn stabilizer bar link is very particular, not ordinary steel can be easily replaced. Requires both quality as light as possible, which in turn requires complex body material hardness, firmness and flexibility to achieve thereto to form a harmonious whole.
The material of the sway bar link is very particular, and it cannot be easily replaced by ordinary steel. Not only requires the weight to be as light as possible, but also requires it to match the hardness of the body material to achieve the combination of rigidity and flexibility to form a harmonious whole.
Pay special attention to the sway bar link during installation. There should be a distance of 0.5cm-1cm between the sway bar link and the hood closed. After the sway bar link is installed, pay attention to check that the distance between the accessories around the sway bar link and the sway bar link is 0.5 cm-1cm, do not stick together, otherwise there will be noise when the car is driving, which will affect the driving.
The vehicle is installed with a sway bar link to eliminate the impact of the vibration caused by the uneven ground on the vehicle body. The vehicle body uses an independent suspension system to absorb a large amount of external vibration.
Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.
Whatsapp : 
Tel : 
Email : 
