The car sway bar link ball head is the joint part of the link suspension and the balance bar, which mainly plays the role of transmitting the force of the car suspension and the balance bar. When the left and right wheels pass through the same bumps or holes on the road, the balance bar will not work. The torsion of the body produces anti-rolling resistance to restrain the body from rolling. Judge...

How to burn rubber suspension bushings correctly Not many people have access to hydraulic presses. So, what are the options for removing the suspension bushing? Burning them is often mentioned, but many people do it wrong. This article will detail how to remove the OE suspension bushing correctly The right way: Heat the shell This method is designed for rubber suspension bushings. Polyurethane bus...

1. Set Aside Bushing Replacement Tools In order to complete a bushing replacement, you will need to have the following tools on hand: An open-end wrench A flat head screwdriver A torque wrench A floor jack Two jack stands Clamps To protect against the possibility of fluid loss from the truck when you have the vehicle suspended, it might be necessary to have a receptacle on hand. 2. Lower the Suspe...

Rubber Bushings in Automotive Automotive control arm bushing have a very different purpose when compared to plain bearing bushings.Plain bearing bushings allow sliding movement between parts with reduced friction. Automotive bushings on the other hand are designed to limit sliding movement using rubber and other elastic materials to spring back parts to their original position. There is ...

Stabilizer links act as components of auto suspensions, connecting several other parts that take much of the punishment as you pass over pot holes and other road imperfections.   Function   Modern cars use segmented suspensions. Stabilizer or sway bars have stabilizer links. The stabilizer bar holds pairs of wheels connected, while stabilizer links hook this larger pi...

Is there any danger when the balance bar ball head is broken? If the ball head of the balance bar breaks, there will be a certain safety hazard. Because the ball head of the balance bar is broken, it will lead to the deviation of the car direction. The breaking of the ball head of the balance bar will have the following effects: 1. Different tread patterns on both sides or different tread depth an...

Can I replace sway bar links myself? 1. Loosen the wheel lug nuts. Loosen them slightly, but do not remove. 2. Jack up/lift the car. You will need to jack the car by placing the jack under the suspension arm so it compresses the suspension and relieves the tension on the link. (See your manual for proper jacking procedures and safety) 3. Remove the lug nuts and the wheel. 4. Identify the bad link....

To figure out why your sway bar link breaks, it's first important to understand how sway bars work. The sway bar, also known as an anti-roll bar or stabilizer bar, is a vital part of your vehicle’s suspension system and keeps it level during cornering. Sway bars are usually a long and hollow arched steel bar attached to the chassis, connecting the left and right sides. This stabilizes your vehicle...

How does a sway bar differ from a sway bar link ? Sway bars and links are found in ATVs, forklifts, racing cars and family cars – basically any type of vehicle with a suspension. Maintaining a vehicle in an upright position during a turn is vital to safety. The parts within a suspension system that help to control this movement are the sway bars and sway links. A sway bar is a long steel tube or b...